Why brushing belongs in your maintenance plan
Brushing lifts matted fibers, redistributes infill, evens traffic patterns, and refreshes appearance. Manufacturers and installers typically list brushing as routine maintenance that helps uphold warranty requirements when performed correctly.
What your warranty usually expects
- Installation by a qualified professional.
- Regular care that includes debris removal and periodic brushing.
- Use of approved tools and techniques that do not cut, melt, or abrade fibers.
- No harsh chemicals, open flames, or excessive heat sources on the turf.
- Prompt repair of seams, edges, and infill levels when needed.
- Keeping records of maintenance and service visits.
Approved tools and techniques
Manual brushing
- Use a stiff synthetic bristle push broom made from polypropylene or nylon.
- Brush with the grain to lift fibers, then cross brush to even out high traffic lanes.
- Apply light, even pressure. Multiple passes beat one aggressive pass.
Power brooming
- Use a turf-rated power broom with soft to medium nylon bristles.
- Keep RPMs moderate and let the bristles do the work.
- Avoid power rakes, dethatchers, or wire brushes.
Tools to avoid
- Metal rakes, wire brushes, or anything with sharp edges.
- Pressure washers used at close range or high PSI that can lift seams.
- Rotary brushes with abrasive or metal components.
How often to brush
- High traffic areas such as play zones or dog runs: weekly to biweekly.
- Moderate residential lawns: monthly or as appearance dictates.
- Low traffic landscapes and decorative installs: quarterly.
- After storms, heavy events, or leaf drop: as needed once the surface is dry.
Always brush when the turf is dry. Brushing wet infill can clump or smear fines.
Simple step by step
- Remove debris, leaves, and pet waste by hand or with a plastic leaf rake.
- Inspect seams and edges. Address lifted sections before brushing.
- Check infill depth. Top up with approved infill if low per your installer guidance.
- Brush in straight passes, overlapping by one third. Then cross brush for an even finish.
- Finish with a light groom to set the pile upright.
What can put a warranty at risk
- Using non approved tools that cut, melt, or excessively abrade fibers.
- Applying solvents, bleach, or petroleum products that stain or degrade yarn.
- Exposing turf to hot objects such as grills, fire pits, fireworks, or mirrors that focus sunlight.
- Neglecting routine maintenance that allows matting, contamination, or seam failure to worsen.
- Modifying infill or the surface with unapproved materials or equipment.
Check your specific product warranty and installer paperwork for the exact terms that apply to your project.
Pro move for proof
- Keep a simple maintenance log with dates, tasks, and photos.
- Save receipts for tools, infill, and any service visits.
- Schedule seasonal checkups with your installer if your warranty includes inspections.
Need help brushing the right way
Want product specific guidance for your turf and climate? Connect with a FusionTurf dealer for a quick walkthrough of approved tools and intervals.
